ARES V-HAWK X4 RTF WITH RADIO AND LIPO, NEEDS CHARGER
SAVE $60.00 (10%)In Stock
(MODE 1) ARES V-HAWK X4 RTF
The Ares Z-Line V-Hawk X4 is designed for pilots who are looking for a unique flying experience — the ability to take off vertically like a helicopter or quadcopter and transition to flying like an airplane.
This flying transition is made easy with the use of a pre-installed, innovative flight control board and pre-assembled rotating motor nacelles.
With just the flip of a channel switch on your transmitter the motor nacelles rotate.
As they do, the flight controller automatically changes the programming from flying like a quad to flying like an airplane with elevon controls.
Simply flip the switch back to return to quad-flying mode.
The V-Hawk X4 is available in two versions that incorporate the reliable new Hitec Red 2.4GHz radio protocol that's compatible with most Hitec systems already on the market.
Choose either Ready-To-Fly (including a Hitec Red-enabled transmitter and receiver) or Pair-To-Fly (packaged with a Hitec Red receiver that’s compatible with your existing Hitec transmitter).
In addition to the RTF and PTF versions, the V-Hawk is also available in RFR (Ready-For-Receiver) form for customers who already have their own radio system.
The V-Hawk X4’s durable EPO airframe comes nearly 100% pre-assembled and includes all four BL motors, four BL ESCs, a control board with stabilization, two 9g servos, one 17g MG servo, and even a 1300mAh 4S Li-Po battery (4S charger not included).
The only assembly you’ll have to complete is gluing on the tail, and even the glue is included!
So, if you’re ready to take on the adventure of an airplane capable of performing vertical take-offs and landings (VTOL), and short take-offs and landings (STOL), the Ares Z-Line V-Hawk X4 is the airplane for you.
Arrives painted and trimmed in eye-catching US Marines scheme.
innovative flight control board allows the V-Hawk to take off vertically, fly like a gyro stabilized quad, then transition to forward flight and revert to elevon control.
Rotating motor nacelles allow you to fly from the smallest of spaces.
Almost 98% built, right out of the box - just add the tail fin (glue included).
A potentially superb FPV platform.
Wingspan: 27.5" (696mm)
Wing Area: 241 sq. in.
Length: 33" (838mm)
All-up weight: 31oz (880g)
Battery: 4s (16.8V) 1300mAh LiPo
Servos: 2 x 9g and 1 x 17g metal gear
Motors: 4 x 2730 kV brushless
Propellers: 8" diameter (2 x clockwise, 2 x counterclockwise)
ESCs: 4 x 12A brushless
What's in the Box
1 x Factory assembled V-Hawk X4 airframe (less fin).
1 x IKONNIK KA-6 6-channel 2.4GHz Hitec Red transmitter.
1 x KA-6 6-channel Hitec Red receiver (RTF and PTF version only).
1 x 1300mAh 4S (16.8V) Li-Po battery.
1 x Fin moulding.
2 x propeller set (including dome spinner nuts and adapters).
1 x Plug-in undercarriage and wheel set.
1 x Tube of foam-friendly adhesive.
1 x Quick-Start Guide.
Be The First To Review This Product!
Help other Detect A Den users shop smarter by writing reviews for products you have purchased.