Sold Out - Backorder Available

Calculate Shipping

This is the Hobbywing Xerun SCT Pro Sensored Brushless ESC and 3400kV 4-Pole Motor Combo, with an included LCD Program Box. The included 4-Pole 3,400kV motor is 2-3S LiPo capable and is intended for 1/10 4WD Short Course Applications. The motor provides large output power and high efficiency, and features both sensored and brushless technology to get the job done. The SCT Pro ESC is 2-4S LiPo capable and also features brushless and sensored technology, but can be used for either 1/10 or 1/8 applications.  
NOTE: This motor features a 5mm motor shaft.  
ESC Features: 
Sensored ESC and sensored motor have the best control feeling.
The switch mode BEC has powerful output to supply all electronic equipments.
Excellent start-up, acceleration and linearity features.
The major electronic components are sealed against splashing water or dust.
Plenty of programmable items, suitable for various of chassis's, tires and racing tracks.
Electric brake function, also compatible with mechanical disc-brake system.
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
Internal timing can be changed easily to make the ESC suitable for various of motors.
Easily programmed with the SET button, LED Program Box, Multifunction LCD Program Box and USB Link Software.
ESC firmware can be updated through the USB adapter in the LCD Program Box.
These is a mounting stand for installing the ESC on chassis easily and firmly.
Motor Features:
Sensor motor has the best control feeling and best performance.
XERUN-3656SD has 4 poles rotor, it has bigger torque, higher efficiency and larger power, best for 1/10 scale 4WD SCT.
Top quality materials:
Aluminum shell (case)
High quality magnets       
Copper wires of high temperature endurance       
Good quality bearings
The "U" shape connectors are easily for soldering.
ESC Specifications: 
Output: Continuous 120A, burst  760A; 
Input: 6-12 cells NiMH/NiCd or 2-4S Lipo; 
BEC: 6V/3A (Switching mode); 
Resistance: 0.0004 Ohm; 
Motor Supported: Sensored and sensorless brushless motor 
Suitable Motor: 
With 6 cells NiMH/NiCd or 2S Lipo:   KV≤6000;
With 7-9 cells NiMH/NiCd or 3S Lipo:  KV≤4000;
With 10-12 cells NiMH/NiCd or 4S Lipo:  KV≤3000;
Suitable Car: 1/10 and 1/8 scale short course truck / buggy / truggy 
Cooling fan: 5-6V;  * Note #1 
Size: 53.5mm(L) * 36mm(W) * 36mm(H). 
Weight: 99g; 
* Note #1: The cooling fan is powered by the built-in BEC of 6V.
Motor Specifications: 
kV: 3400 
Motor Diameter: 36mm 
Motor Length: 56mm 
Shaft Diameter: 5mm 
Shaft Length: 18.1mm 
Rotor Poles: 4 
Volts: 2-3 LiPo 
Weight: 220g
LCD Program Box Specifications: 
Size: 90mm (L) * 51mm (W) * 17mm (H) 
Weight: 65g 
Input Voltage: 4.5-12.6V (If the ESC hasn’t a built-in BEC, you must use an additional battery pack to supply the program box) 
Display: 16x2 characters LCD. 
Interface: Mini USB interface, ESC interface (Futaba plug), Power supply interface (Futaba plug)
This product was added to our catalog on July 29, 2014.


SKU 1818
Brand Hobbywing
Shipping Weight 0.2000kg
Shipping Width 0.200m
Shipping Height 0.200m
Shipping Length 0.200m
Shipping Cubic 0.008000m3

Be The First To Review This Product!

Help other Detect A Den users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

More From This Category