The PRO‑SONIC wireless audio system generates audio using advanced wireless technology to achieve clear sound with minimal perceivable time delay.
The PRO‑SONIC Receive Module features an internal loudspeaker and a 6.35mm (¼") headphone socket for use with your choice of headphones. It can be attached to your harness or clothing using the metal belt clip.
- Use headphones or built-in speaker
- Adjustable volume setting
- 10 m / 32-feet operating range
- SDC 2300 adaptor cable included
- Charge from your car, AC power or USB charger
Compatible with any detector!
The PRO-SONIC Transmit Module sends out low-power (mW) radio waves using the ISM frequency band (2.402 – 2.480Ghz). The PRO-SONIC Receive Module senses these signals and establishes a piconet communication network with the Transmit Module, using frequency hopping to eliminate interference from other wireless devices.
Everything You Need
The PRO-SONIC system contains everything you need for clear, fast, wireless audio.
PRO-SONIC is compatible with any detector, and comes with an SDC adapter cable and a handy car charger for charging on the go.
- Receive and Transmit modules
- Universal Charger (AC and car charger)
- SDC 2300 adapter cable
- Transmit Module Audio Cable (6.35mm/1/4-inch)
- Dual Charging Cable (1 × USB-A, 2 × USB Micro-B)
- Getting Started Guide
| Radio frequency range
||2.402 – 2.480 Ghz
| Wireless range
||≤10 metres / 32 feet
| Operating time
| Stand-by time
| RF transmission power
||0 – +8dBm
| Audio amplifier power
| Audio distortion
||<1% @ 1 kHz
| Response time
| Volume adjustment
2" × 1.38" × 0.63"
4.29" × 2.44" × 0.89"
||23 g / 0.8 oz
||110 g / 3.8 oz
"The PRO-SONIC system is easy to set up and gives a clear signal on all my Minelab's. It's also transferable between my SDC and 4500, eliminating annoying headphone cable issues."
Minelab Field Tester
PRO-SONIC is now available to order from Australian dealers. Available from outside of Australia from January 2017 onwards.